This nativity scene is guarded by a heavenly audience. What a peaceful sight!
● This STL file is recommended for FDM Printers!
● 3D Printing Time Based on Ender 3: 1 Day 01 Hour 55 Minutes (will vary accord to you printer model) ● Approximately Height : 21 cm
 
● In order to assembly this print you will need the materials below:
LED Lights

On-Off Switch
 
Soldering Iron

Electrical Plug (2.1mm DC Jack 12V)
 
Power Supply (12V 1A)
 
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm ● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
● Recommended Initial Layer Height: 0.20 mm ● Recommended Layer Height: 0.20 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Top Layer: 7.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
 
     The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!